Pc Setting - Picture Position, Clock Phase, Sampling Clock, Reset - Toshiba REGZA C3000 Serie Bedienungsanleitung

PC settings – picture position, clock phase,
Picture position
Connect the PC (as shown in the 'Connecting a PC'
section) and ensure that a picture is showing on the
television screen. The picture position may now be adjusted
to suit personal preference.
Press to select PC, then select PC Setting
B
1
from the SET UP menu.
Language
Country
AV connection
PC Setting
Back
MENU EXIT
Press OK. Press and
f
2
then or to adjust the settings.
z x
PC Settings
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU EXIT
Clock phase
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
phase.
Use or to adjust until the picture clears.
z x
3
sampling clock, reset
SET UP
English
UK
OK
OK
Watch TV
to select an option,
e
1/2
0
– 5
0
– 5
0
0
Watch TV
until PC Setting is
e
to highlight Clock
e
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
Sampling clock.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU
Use or
z
3
To return to the original factory settings.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
Press OK.
3
NOTE: When a PC is connected using HDMI none of
these functions will be available.
22
Sampling clock
until PC Setting is
e
to highlight
e
PC Settings
– 5
– 5
Watch TV
EXIT
to adjust until the picture clears.
x
Reset
until PC Setting is
e
to highlight Reset.
e
1/2
0
0
0
0