Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Operating Instructions
EN
CHAPTER 3
PRODUCT
INFORMATION
Central ventilation unit – KWL 360 W/W ET
3.1
Unit overview
3
15
16
15
11
8
Exhaust air fan
Supply air fan
Intake air filter cover
Panel
Unit door
Back panel
3.2
Functional description
The unit has a heat exchanger. The heat exchanger continuously extracts heat from the stale room air (extract air) and
transfers this heat to the fresh intake air, which flows into all rooms connected to the duct system as pre-heated, filtered
supply air. The stale air is extracted from the connected rooms via the duct system. It flows through the duct system
back to the ventilation unit, gives off heat and is led outside through the exhaust air duct (see Fig. 2).
The heat recovery efficiency depends on the factors of humidity and the temperature difference between intake and
extract air. Units with enthalpy heat exchangers (KWL 360 W ET) recover humidity from the extract air in addition
to heat, which is returned to the rooms through the supply air.
4
5
9
9
7
12
17
2
Silencer
Heat exchanger
Design panel
Ball siphon
Extract air filter cover
Terminal box
7
13
1
10
Cable gland
Wall bracket
Extract air filter Coarse 65 %
S upply air filter Coarse 65 %
Supply air filter ePM1 50 %
Bypass motor
Fig. 1
14
6
Werbung
Inhaltsverzeichnis
