Unpacking The Appliance; Overview Of The Components / Scope Of Delivery; Notes For Use; Installation - Clatronic BZ 3740 Bedienungsanleitung, Garantie

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material such as plastic films, filler
material, cable ties and cardboard packaging.
3. Sensitive surfaces are possibly protected with foil.
Remove these foils.
4. Check the content for any missing parts.
5. In the event that the packaging content should be incom-
plete or if damages are noticeable, do not operate the
appliance. Return it to the dealer immediately.
NOTE:
There may be dust and production residue on the
appliance. We recommend cleaning the appliance as
described under "Cleaning".
Overview of the Components /
Scope of Delivery
1 Buttons / (temperature adjustment)
2 LED temperature indicator
3 Pressure regulator for carbon dioxide
4 Beer hose cover
5 Fitting for the connections
6 CO cartridge holder
2
7 Lid
8 CO feed valve
2
9 Keg holder
10 Beer connection valve
11 Ventilation slots
12 Power cord
13 Main switch
14 Collecting tray
15 Drip tray
16 Drain lever
17 Beer tap
18 Lid opener
19 Tap handle
20 Cleaning balloon
21 Cleaning hose
22 Universal adapter
23 CO cartridge
2
No Illustration
Keg tap
Beer hose including adapter for Heineken kegs
Spare silicone ring for the keg tap thread
Spare CO cartridge
2
Spare universal adapter
Spare adapter for Heineken kegs (2 ×)
Replacement beer hose for Heineken kegs (2 ×)

Notes for Use

• When transporting the beer dispenser, always carry it
holding the bottom edge and not by the beer tap, lid or
power cord.
44
BZ3740_IM_new
• Only use the dispenser with the correct beer keg.
• Do not place any objects on the dispenser.
• Follow the instructions on the kegs.
• Check that the kegs are tight and undamaged! Ensure
that the keg lid is not dented so that the clamps of the
dispensing unit can grip under the edge of the lid.
• Do not use beer that has already reached the best
before date.
• Before placing the keg into the appliance, store it in a
cool environment (but not in the freezer compartment)
for 12 hours.
• Never shake the keg before using it.
• Do not expose the kegs to direct sunlight.

Installation

WARNING:
Before fitting or removing any parts, always disconnect
the plug from the mains socket!
1. Place the beer dispenser on a stable, horizontal, level
and non-slip surface. Ensure that there is at least 15 cm
of space around the dispenser for optimal operation.
2. Place the drip tray on the collecting tray. Now, slide the
collecting tray to the front of the appliance until it clicks
into place. Make sure the collecting tray does not pro-
trude beyond the base.
3. Attach the tap handle. The flattened
side of the handle points forward. En-
sure that the silicone ring is in the right
place. Make sure the handle is fully
seated on the tap.
4. Dispensing unit: Make sure the silicone
ring has been inserted into the threaded
part of the keg tap. Then put the fitting
through the barrel holder. Make sure the
lug on the fitting is seated in the recess
of the keg holder. Screw the keg tap
onto the fitting. Now the keg holder is
sitting between the fitting and the keg tap.

Preparation

Preparing the Beer Keg

1. Buy a standard 5 litre party keg of your choice.
CAUTION:
If the keg has been shaken (transport, etc.), the beer
must be allowed to stand for a sufficient time prior to
use.
2. Cool the 5 litre party keg prior to use. The optimal
drinking temperature is about 6 – 8 °C. The beer from
a warmer keg is less refreshing. Heavy foaming can
also result. To cool the keg in the beer dispenser, it is
recommended to place it in the connected dispenser
the day before. At a keg temperature of about 23 °C, it
13.09.22