Storage; Troubleshooting - Silvercrest SED 3.7 B2 Bedienungsanleitung

Clean the epilator head 2 under running water and then
―
allow it to dry.
Place the epilator head 2 back onto the appliance. Ensure
―
that the gears on the epilator head 2 and on the appliance
mesh with each other. The epilator head 2 must audibly
engage.
Clean the appliance housing and the mains power adapter 9
■
GB
with a moist cloth. If required, use some mild detergent on the cloth.
Ensure that the appliance is completely dry before the next use.

Storage

Always protect the epilator head 2 with the supplied protective
■
cap 1.
Store the appliance, the cleaning brush q and the mains power
■
adapter 9 in the storage pouch 0.
■ Store the appliance at a dry and dustfree location.

Troubleshooting

Problem
The appliance
does not function.
The appliance
only runs slowly.
44
Cause
The battery is
drained.
The appliance
is defective.
The battery is
drained.
Solution
Recharge the
appliance.
In this case, contact
Customer Services.
Recharge the
appliance.
SED 3.7 B2