Configuration Area (0X8000 - 0X8Fff) - ifm AL1432 Betriebsanleitung

IO-Link Master mit EtherCAT-Schnittstelle
11.1.3.5 Configuration Area (0x8000 - 0x8FFF)
Index Subindex Name
0x8000 Port 1: Port Configuration
• 0x04 Device ID
• 0x05 Vendor ID
• 0x20 IO-Link Revision
• 0x22 Cycle Time
• 0x24 Process Data In Length
• 0x25 Process Data Out Length
• 0x28 Master Control
0x8008 Port 1: Vendor Specific Port Configuration
• 0x01 Validation ID
• 0x02 Reconfigure
• 0x03 Byte Swap
• 0x04 Mode UA
• 0x05 Current Limit UA
• 0x06 Current Limit US
Port 2: Port Configuration (Struktur: Ò Index 0x8000)
0x8010
0x8018 Port 2: Vendor Specific Port Configuration (Struktur: Ò Index 0x8008)
0x8020 Port 3: Port Configuration (Struktur: Ò Index 0x8000)
Port 3: Vendor Specific Port Configuration (Struktur: Ò Index 0x8008)
0x8028
Mögliche Werte
0x000000...0xFFFFFF
0x0000...0xFFFF
• 0x10: IO-Link Revision 1.0
• 0x11: IO-Link Revision 1.1
• 0x0000 0000: Best possible (Default)
• 0x0000 0001: 1 µs
...
• 0x0002 06C0: 132800 µs
• 0x00: 0 Byte
• 0x01: 4 Bytes (Default)
• 0x02: 8 Bytes
• 0x03: 16 Bytes
• 0x04: 32 Bytes
• 0x00: 0 Byte
• 0x01: 4 Bytes (Default)
• 0x02: 8 Bytes
• 0x03: 16 Bytes
• 0x04: 32 Bytes
• 0x00: Deactivated
• 0x01: Digital Input
• 0x02: Digital Output
• 0x03: IO-Link (Default)
• 0x00: No check (Default)
• 0x01: V1.0 Device, no Datastorage
• 0x02: V1.1 Device, no Datastorage
• 0x03: V1.1 Device, Backup + Restore
• 0x04: V1.1 Device, Restore
• 0x00: No action (Default)
• 0xFF: Activate configuration
• 0x00: No action (Default)
• 0x01: Byte swap
• 0x0000: UA = OFF - IO-Link Port Class A
• 0x0001: UA = ON - IO-Link Port Class B
(Default)
• 0x0002: Digital Output (DO)
• 0x0000: 0 mA
...
• 0x07D0: 2000 mA (Default)
• 0x0000: 0 mA
...
• 0x01C2: 450 mA
...
• 0x07D0: 2000 mA (Default)
AL1432
Datentyp /
Zugriff
UINT32 / rw
UINT32 / rw
UINT8 / rw
UINT32 / rw
UINT8 / rw
UINT8 / rw
UNIT16 / rw
UINT8 / rw
UINT8 / rw
UINT8 / rw
UINT16 / rw
UINT16 / rw
UINT16 / rw
79