Bosch C-IR 20 Installations- Und Bedienungsanleitung Seite 41

The icon will be displayed when the override function is active. To exit override
mode, switch to Manual and then back to automatic mode.
There are four built-in programs that cannot be modified and three customizable user
programs.
Customize a user program
▶ Press the Mode button, the
a user program.
▶ Then, it is possible to choose between three configurations.
a) Set day by day
A program can be set for each day. The first day will automatically be set to Mon.
The minimum program step is 15 minutes. It is necessary to configure several
periods. The first period begins at 00:00.
▶ Choose the end time period with the + and - keys and the temperature to be
followed during this period.
▶ Press the Nextbutton to continue the program. The next period will start at the
end of the last period.
▶ For all periods defined, an end period needs to be defined as well as
temperature. The last period stops at 24:00. Then, press the Next button.
▶ Then, define another program for Tuesday by pressing the EDIT button. It is
possible to copy the program set for Mon by pressing Copy to button.
b) Set weekday/weekend
One program needs to be defined for the weekdays (Mon to Fri) and one for the
weekend (Sat and Sun).
Use the same process as explained above to customize the program.
c) Set all days at once
One program needs to be defined. It will be the same for every day of the week.
Use the same process as explained above to customize the program.
How to choose a program
▶ Press the Mode button, the
▶ Press Select Program and select between four built-in programs and three user
programs.
C-IR 20 – 6721851970 (2022/12)
icon and then Edit Program button and choose
icon and then Edit Programbutton.
Operation
41