Specifications - Bosch C-IR 20 Installations- Und Bedienungsanleitung

• Estimation of the cost and consumption of the installation
2.5

Specifications

This product conforms to European directives and supplementary
national requirements in design and operation. Compliance is
demonstrated by the CE marking.
You can request the conformity declaration of the product. If you require this, contact
the address on the back cover of these instructions.
Batteries
Power consumption
Regulation characteristics
Protection
Measured temperature precision
Environmental temperature:
Operating temperature
Shipping and storage temperature
Setting temperature range
Comfort, Reduced
Holiday /Antifreeze)
Maximum load
Dimensions
(width x height x depth)
Battery time
Software version
Table 8
Type of heat transfer/room temperature-dependent control
Electronic room temperature-
dependent control with week timer
Other control options
C-IR 20 – 6721851970 (2022/12)
1 x ML 1220
~2.5W
PID (10 min cycle) or Hysteresis of 0,5 °C
IP21, class II
0,1 °C
0 °C to -40 °C
-10 °C to +50 °C
5 °C to 37 °C by 0,5 °C step
7 °C (adjustable)
Relay 16 Amps, 250VAC
91 mm x 91 mm x 42 mm (for more
dimensions  Fig. 2 at end of document)
24 hours minimum (battery fully charged)
Displayed in the user menu
– –
Product Information
Yes
33