Cleaning The Brew Group - Saeco Xelsis SUPREMA SM8885 Benutzerhandbuch

14
English
Item
Milk container
HygieSteam
container (milk tube
holder)
Pre-ground coffee
compartment
Coffee grounds
container
Drip tray
Lubrication of the
brew group
Water tank
Machine front
Descaling of the
machine

Cleaning the brew group

Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits. Go to
the 'Status' menu on the screen and select 'Brew group clean' or visit www.saeco.com/care for support
videos on how to remove, insert and clean the brew group.
When to clean
Monthly
Weekly
Weekly or when the machine
reminds you
Check the pre-ground coffee
compartment weekly to see if it is
clogged
Empty the coffee grounds
container when prompted by the
machine. Clean it weekly
Empty the drip tray daily or as
soon as the red 'drip tray full'
indicator pops up through the
drip tray (Fig. 29). Clean the drip
tray weekly
Every 2 months
Weekly
Weekly
When the machine asks you to
descale
How to find in the control panel/
What to do
STATUS -> HYGIESTEAM -> DEEP MILK CLEAN.
Follow the steps of the self-cleaning process to
clean the milk system.
Disassemble the milk container (Fig. 24) and
push out the ball using the pin of the milk tube
(Fig. 25). Clean all parts of the milk container
under the tap or in the dishwasher.
Remove the HygieSteam container from the
machine (Fig. 26) and remove the HygieSteam
cover (Fig. 27). Clean the HygieSteam container
and cover under the tap.
Unplug the machine and remove the brew
group. Open the lid of the pre-ground coffee
compartment and insert the spoon handle into
it. Move the handle up and down until the
clogged ground coffee falls down (Fig. 28). Go
to www.saeco.com/care for detailed video
instructions.
Remove the coffee grounds container while
the machine is switched on. Rinse it under the
tap with some washing-up liquid.
Remove the drip tray (Fig. 30) and rinse it
under the tap with some washing-up liquid.
Lubricate the brew group with the by-packed
grease (see 'Lubricating the brew group'). Go
to www.saeco.com/care for detailed video
instructions.
Rinse the water tank under the tap.
Clean with a non-abrasive cloth.
STATUS -> DESCALING. Follow the steps to
descale the machine. When descaling is
needed, the machine asks you to descale it,
press the OK icon to start and follow the steps.