Cleaning The Brew Group - Saeco Talea Touch Bedienungsanleitung

CLEANING THE BREW GROUP.

The Brew Group must be cleaned at least once a week.
Wash the Brew Group with warm water.
WARNING! Do not wash the Brew Group with detergents that can compromise its correct operation. Do
not wash in the dishwasher.
1
Open the service door and remove
the dregs drawer.
4
Make sure the Brew Group is in
rest position; the two references
must match.
7
Insert the washed and dried Brew
Group. DO NOT PRESS THE
"PUSH" BUTTON.
2
Press the PUSH button to remove
the Brew Group.
5
Make sure the components are in
the correct position. The hook shown
must be in the correct position; to
"PUSH" button.
8
Insert the dregs drawer.
37
3
and dry.
6
The lever on the rear part of the
group must be in contact with
the group base.
9
Close the service door.