Indication Of Residual Heat; Power Function And Super Power Function; Timer Function - Novy Panorama Power 1831 Bedienungsanleitung

– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
on the display. The symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use. The pan detection
no longer be active.

5.3.3 Indication of residual heat

After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
symbol disappears when the cooking zone glass can be
H
handled without danger.


WARNING: As long as the residual heat
indication remains active, the cooking zone(s)
must not be touched and no heat-sensitive items
should be placed on the cooking zone. Risk of
fire and burns.

5.3.4 Power function and Super Power function

The Power function P and Super Power
power rating of the selected cooking zone. If this function is
activated, these cooking zones will be subjected to considerably
higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch off Power
Glide your finger over the slider
Switching Super Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch on Super Power
Press the end of the slider again
Switch off Super Power
Glide your finger over the slider
Switch off Power
Glide your finger over the slider
Management of maximum power:
The hob is divided into 2 separate heating groups.
symbol will flash
will
H . The
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3700 W.
If simultaneous cooking is taking place on zones A1 and A2 or B1
and B2, the power of 3700 W is divided between these 2 zones
A1 and A2 or B1 and B2.
increases the
Cooking zone in cm
A1
A2
B1
B2
Power limit
Display
Selected cooking zone with Power function
P
Power limit activated
[9] reduced to [8] and flashes
9‐0
In order to be able to make use of the maximum possible power
for 2 zones at the same time, use a combination of zone A1 or
Display
A2 and B1 or B2.
P

5.3.5 Timer function

The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
+ P
for each zone.
P‐0
Setting or changing the cooking time
9‐0 Select the power by gliding your finger over the
slider
– 69 –
B2 B1 A2 A1
8 8
B2 B1
Power (W)
24 x 20
Normal: 2100
24 x 20
Power: 3000
24 x 20
Super Power: 3700
24 x 20
Timer function
8 8 8
8 8
min
A2 A1
Display
P
8
Display
1‐P