Timer Function; Flexzone - Novy Panorama Power 1831 Bedienungsanleitung

If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum power of the zone A1 is 3000W and 1850W for
zone A2
If simultaneous cooking is taking place on zones A1 and A2, the
maximum power of 3700W is divided between these 2 zones
A1 and A2.
Cooking zone in cm
A1 24 x 20
A2 24 x 20
Power limit
Selected cooking zone with Power function
Power limit activated
[9] reduced to [8] and flashes

4.1.7 Timer function

The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
for each zone.
Timer function
Setting or changing the cooking time
Press the cooking zone selection button
‐ +
Press and at the same time.
Select the timer
‐ +
Press and at the same time.
Reduce the time
‐
Press on the timer
Increase the time
+
Press on the timer
A1 A2
Panorama Power 4 zones (1841)
Power (W)
Normal: 2100
Power: 3000
Normal: 1600
Power: 1850
Display
P
8
Display
.
1‐P
00
60‐
59...
01‐
02...
A point next to the power level display of the selected zone
lights up to show the activation of the timer.
The time has been selected and the countdown has begun.
Switch off the timer function
Select the timer
Press the cooking zone selection button
‐ +
Press and at the same time.
Stop the timer
‐
Keep pressing on the timer until the timer
displays 00
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
Using the timer without cooking
Timer without cooking
Switch on the hob
Press for 2 seconds
Select the time
‐ +
Press and simultaneously
Reduce the time
‐
Press on the timer
Increase the time
+
Press on the timer
The time has been selected and the countdown has begun.
Turn off automatically at the end of the cooking time:
As soon as the selected cooking time is complete, the display
00
will flash , a beep will be heard, and the cooking zone will
turn off. To stop the buzzer and flashing light, press a control
button.

4.1.8 Flexzone

This function allows you to link the 2 left and 2 right zones so
they operate as 2 large zones. This function can be activated
manually a large pot/pan be placed on the cooking surface.
Manual activation
Simultaneously press on both cooking zone
selection buttons
A2 or B1, B2 to be linked.
Increase the power
+ ‐
Press the or button
Switch Flexzone off
Simultaneously press on both cooking zone
selection buttons
– 67 –
Display
The lamp
.
for that zone
lights up
Display
Flexzone
Display
+ of the zones A1,
of both linked flexzones.
00
00
60‐
59...
01‐
02...
0 ]
0‐9
0