Filling The Water Dispenser's Tank - Beko GNE480E30ZXPN Bedienungsanleitung

Operating the product
2. After filling the cup up to the level you want,
release the lever.
C
Please note, how much water flows
from the dispenser depends on how far
you depress the lever. As the level of
water in your cup / glass rises, gently
reduce the amount of pressure on the
lever to avoid overflow. If you slightly
press the arm, the water will drip; this
is quite normal and not a failure.

5.13. Filling the water dispenser's tank

Water tank filling reservoir is located inside the door
rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
C
Do not fill the water tank with any
other liquid except for water such as
fruit juices, carbonated beverages or
alcoholic drinks which are not suitable
to use in the water dispenser. Water
dispenser will be irreparably damaged
if these kinds of liquids are used.
Warranty does not cover such usages.
Some chemical substances and
additives contained in these kinds of
drinks/liquids may damage the water
tank.
Refrigerator / User Manual
C
Use clean drinking water only.
C
Capacity of the water tank is 3 liters;
do not overfill.
23 / 31 EN