Procedure When Adjusting (Only Dealers Authorised By Kern) - KERN MPB300K100/P Betriebsanleitung

5.6.1 Procedure when adjusting (only dealers authorised by KERN)

Observe stable environmental conditions. A warming up time (see chapter 1) is re-
quired for stabilization.
Turn on balance by pressing the [ON/OFF] key
Keep [→0←] button depressed for approx. 3 sec until
"SETUP" is displayed followed by "9rAd"
Press the [ TARE ] button as often as required until
"CAL ib" is displayed
Press the [HOLD] button.
Press the [TARE] key. ( Zero count mode )
Press the [→0←] button repeatedly until "CAL 0" is
displayed.
Press the [HOLD] button.
Press the [TARE] key.
Enter the required size of the adjustment weight (See
Section 1, "Technical Data"): Press the [HOLD] button
to select the item to be changed and press the [TARE]
button to select the numerical value.
Confirm by pressing the [→0←] button.
MPB-BAPS-e-1715
Operation Display
z000
��
a
SETUP
��

9RAD
��
B
CAL
��
K
CAL O
��
30770
CAL O
��
CAL 5
��
200.0
0
13