Herunterladen Inhalt Inhalt Diese Seite drucken

YOKOGAWA FLXA202 Bedienungsanleitung Seite 41

Vorschau ausblenden Andere Handbücher für FLXA202:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Model:
FLXA21 / FLXA202
Notes:
1.
Installation must be in accordance with the Canadian Electric Code Part I (C22.1),
ANSI/ISA-RP12.06.01 and relevant local codes.
2.
FISCO installation must be in accordance with CAN/CSA-C22.2 No. 60079-25.
3.
The associated apparatus must be a FISCO power supply or a linear source meeting
the following conditions.
4.
Control equipment connected to the associated apparatus must not use or generate a
voltage which exceeds Um of the associated apparatus.
5.
The control drawing of the associated apparatus must be followed when installing the
equipment.
6.
When installed in Zone 0 or 1, or Division 1, Sensor 1 may be a simple apparatus or an
intrinsically safe apparatus meeting the conditions below.
When installed in Zone 2 or Division 2, Sensor 1 may be a simple apparatus or a
non-incendive field wiring apparatus meeting the conditions below, or alternatively,
it may be equipment suitable for Zone 2 or Division 2 respectively, if a suitable wiring
method other than non-incendive field wiring is employed.
7.
The control equipment must be a FISCO power supply, FNICO power supply or an
associated non-incendive field wiring apparatus meeting the conditions below.
Alternatively, it may be general-purpose equipment, if a suitable wiring method other
than non-incendive field wiring is employed.
8.
WARNING – POTENTIAL ELECTROSTATIC CHARGING HAZARD
AVERTISSEMENT – DANGER POTENTIEL DE CHARGES ÉLECTROSTATIQUES
9.
WARNING – SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
AVERTISSEMENT – LA SUBSTITUTION DE COMPOSANTS PEUT COMPROMETTRE LA
SÉCURITÉ INTRINSÉQUE.
10. WARNING – SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR
ZONE 2 / DIVISION 2.
AVERTISSEMENT –LA SUBSTITUTION DE COMPOSANTS PEUT RENDRE CE MATÉRIEL
INACCEPTABLE POUR LES EMPLACEMENTS DE ZONE 2 / DIVISION 2.
Rev.
Uo (or Voc) ≤ Ui
Io (or Isc) ≤ Ii
Po ≤ Pi
Co (or Ca) ≥ Ci + Ccable
Lo (or La) ≥ Li + Lcable
Ui (or Vmax) ≥ Uo
Ii (or Imax) ≥ Io
Pi ≥ Po
Ci ≤ Co – Ccable
Li ≤ Lo – Lcable
Uo (or Voc) ≤ Ui
Co (or Ca) ≥ Ci + Ccable
Lo (or La) ≥ Li + Lcable
Yokogawa Electric Corporation
Date:
May 29, 2017
Doc. No.: ICS032-A72 P.3
IM 12A01A02-20D-E
40
9. Ausgabe: 20. Juni 2022-00

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Flxa21 2

Inhaltsverzeichnis