Hydro-Pro HYDRO PRO5 Bedienungsanleitung Seite 20

4. Accessories
4.1 Accessories list
Anti-vibration base, 4 pcs
10M Signal wire, 1 pc
4.2 Accessories Installation
Draining jet, 2 pcs
Water drainage pipes, 2 pcs
- 18 -
Waterproof box, 1 pc
Anti-vibration bases
1. Take out 4 Anti-vibration bases
2. Put them one by one on the
bottom of machine like the picture.
Draining jet
1. Install the draining jet under the
bottom panel
2. Connect with a water pipe to drain
out the water.
Note: Lift the heat pump to install the
jet. Never overturn the heat pump, it
could damage the compressor.