Hydro-Pro HYDRO PRO5 Bedienungsanleitung Seite 11

HYDRO-PRO Swimming Pool Heat Pump
User and Service manual
INDEX
1. Specifications
2. Dimension
3. Installation and connection
4. Accessories
5. Electrical Wiring
6. Display Controller Operation
7. Running data setting
8. Troubleshooting
9. Exploded Diagram
10. Maintenance
11. Warranty and returns
Thank you for using HYDRO-PRO swimming pool heat pump for your pool heating, it will heat
your pool water and keep the constant temperature when the air ambient temperature is at -5
to 43℃
ATTENTION: This manual includes all the necessary information with the use and
the installation of your heat pump.
The installator must read the manual and attentively follow the instructions in implementation
and maintenance.
The installator is responsible for the installation of the product and should follow all the
instructions of the manufacturer and the regulations in application. Incorrect installation
against the manual implies the exclusion of the entire guarantee.
The manufacturer declines any responsibility for the damage caused with the people, objects
and of the errors due to the installation that disobey the manual guidline. Any use that is
without conformity at the origin of its manufacturing will be regarded as dangerous.
WARNING: Please always empty the water in heat pump during winter time or when the
ambient temperature drops below 0℃, or else the Titanium exchanger will be damaged
because of being frozen, in such case, your warranty will be lost.
WARNING: Please always cut the power supply if you want to open the cabinet to reach
inside the heat pump, because there is high voltage electricity inside.
WARNING: Please well keep the display controller in a dry area, or well close the insulation
cover to protect the display controller from being damaged by humidility.
- 9 -