Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
InstallatIon
General information
InstallatIon
1. General information
these instructions are intended for qualified contractors.
Note
Read these instructions carefully before using the unit
and retain them for future reference. Pass on these
instructions to a new user if required.
Other applicable documents
operating and installation instructions of the ventila-
tion unit
Please see unit operating instructions for information on "Cus-
tomer service and guarantee" and "Environment and recycling".
1.1
Safety instructions
1.1.1 Structure of safety instructions
KEYWORD Type of risk
Here, possible consequences are listed that may re-
sult from failure to observe the safety instructions.
f Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
Symbol
Type of risk
Injury
Electrocution
1.1.3 Keywords
KEYWORD
Meaning
DanGER
Failure to observe this information will result in serious
injury or death.
WaRnInG
Failure to observe this information may result in serious
injury or death.
CaUtIon
Failure to observe this information may result in non-se-
rious or minor injury.
1.2 Other symbols in this documentation
Note
General information is identified by the adjacent sym-
bol.
f Read these texts carefully.
f this symbol indicates that you have to do something. the
action you need to take is described step by step.
ltM dezent nHR
2. Safety
2.1
Intended use
this product is a heating coil for convenient heating of the
supply air.
any other use beyond that described shall be deemed inappro-
priate. observation of these instructions and of the instructions
for any accessories used is also part of the correct use of this
unit.
2.2 General safety instructions
WARNING Injury
!
Take care when handling objects with sharp edges.
These might cause cuts if handled carelessly.
f Wear protective clothing, including protective
gloves.
only qualified contractors should carry out installation, com-
missioning, maintenance and repair.
2.3 Instructions, standards and regulations
Note
observe all applicable national and regional regula-
tions and instructions.
3. Product description
Compatible units
ltM dezent .....
VRl-C .....
3.1
Standard delivery
LTM dezent 300 NHR
1
Reheating coil
3
screws
2
Cable ties
LTM dezent 600/800 NHR
1
Reheating coil
3
Pan head self-tapping screws
3
Cable ties
M5x10
4.2x16
| 5
Werbung
Inhaltsverzeichnis
