Menu Functions - 3M PELTOR WS ALERT X Bedienungsanleitung

EN
If one of the devices is connected, the unconnected device is
removed. Otherwise, the first paired device is removed.
8.5.1. RECONNECTING BLUETOOTH DEVICES
When the headset is powered on, it tries to reconnect to all
paired devices during 5 minutes. A voice message will
confirm the connection, "Connected".
NOTE: If the link is lost, the headset will try to reconnect
during 30 seconds. A voice message will inform you if your
link is lost, "Disconnected".
8.6. CONNECTED TO PHONE
8.6.1. OPERATING PHONE
(Figure 8)
Bluetooth
State
button
No activity
Streaming
Incoming call
Short press
Outgoing call/Call
in progress
Call in progress
on phone,
incoming call
No activity/
Streaming
Incoming call
Long press
Call in progress
Call in progress
on phone,
incoming call
Short double
Streaming
press
Short triple
Streaming
press
DID YOU KNOW: Audio playback will be automatically
paused from audio playback unit when you have a call in
progress. After ending the call, the audio playback will
automatically start again.
8.7. CONNECTED TO TWO-WAY RADIO
8.7.1. OPERATING TWO-WAY RADIO
(Figure 8)
Bluetooth
State
button
No activity/
Press
Streaming
Transmitting on
Release
two-way radio
6
8.8. 3M™ CONNECTED EQUIPMENT, MOBILE
Connect your "WS™ ALERT™ X Headset" with the "3M™
Connected Equipment" mobile application supporting both
Android and iOS. When connected to the mobile application
you will have access to settings, configurations, user
instructions etc.
NOTE: For more information go to the "App Store" or "Google
Play" and download the "3M™ Connected Equipment"
application. For support on the "3M™ Connected Equipment",
please see information in the mobile application.
9.
9.1. CONFIGURING YOUR HEADSET
Action
(Figure 7)
Long press (~2 s) the Menu button [M] to access the
Play
configuration menu. A voice message will confirm "Menu".
Short press (1 s) the Menu button [M] to navigate through the
Pause
menu. A voice message will confirm each menu step. Short
press (~0,5 s) the [ + ] or [–] button to activate/deactivate/
Answer
change different configurations.
1. Bluetooth pairing
End call
End ongoing call,
answer incoming call
Voice control
Reject
2. Bass boost
Transfer call between
phone/headset
Reject incoming call
3. Ambient balance
Skip to next track
Go to previous track
4. Ambient equalizer
5. Sidetone volume
Action
6. Battery type
Start transmitting on
two-way radio
7. Reset to factory default
Stop transmitting on
two-way radio
APPLICATION

MENU FUNCTIONS

(Figure 6)
When the voice message says "Bluetooth pairing", short
press (1 s) the [ + ] button to start pairing. Short press
(~0,5 s) the [–] button to stop pairing. A voice message will
confirm "Pairing on". Search and select "WS ALERT X"
on your Bluetooth device. A voice message will confirm
when pairing is complete, "Pairing complete" and
"Connected". Short press (1 s) the [–] button to stop the
pairing. A voice message will confirm, "Pairing off".
(Figure 7)
Bass boost gives a fuller bass sound to streamed stereo
music. Short press (1 s) the [ + ] or [–] button to enable/
disable bass boost.
(Figure 7)
Short press (1 s) the [–] button to increase left side and
reduce right side. Short press (~0,5 s) the [ + ] button to
increase right side and reduce left side. A voice message
will notify when the ambient balance is centered, "Center".
(Figure 7)
Ambient equalizer changes the frequency characteristics
of the ambient sound. Short press (~0,5 s) the [–] or [ + ]
button to change the ambient equalizer levels,
"Low – Normal – High – Extra high".
(Figure 7)
Sidetone is audible feedback to the headset user during a
conversation. Short press (~0,5 s) the [–] or [ + ] button to
change the sidetone volume, "Off – Low – Normal – High".
(Figure 7)
Short press (~0,5 s) the [–] or [ + ] button to change the
battery type to either rechargeable or alkaline.
(Figure 9)
Short press (~0,5 s) the [–] or [ + ] button, then long press
(~2 s) the Menu button [M]. A voice message will guide
you.