METREL MD 1000-LED Bedienungsanleitung Seite 6

Technical Specification
AC/DC Voltage
Test Range
Operation time
Response Time
Frequency Range
Continuity & Diode Test
Indication
Resistance range
Test Current
RCD trigger test
RCD fault test
Phase Testing
Phase Testing
Phase Sequence
Phase indication
Display
Tolerance
Safety & Protection
Overload Category
Compliant to standards
Protection degree
Power supply
Dimensions
Weight
Dimensions
Declaration of conformity
This product is in conformity with standards of low voltage in accordance with the
regulations 73/23/EEC, 89/336/EEC.
Fields of application
The tool is intended for use in applications as described in the operating instructions
only.
Any other form of usage is not permitted and can lead to accidents or destruction of the
device. Any misuse will result in the expiry of all guarantee and warranty claims on the
part of the operator against the manufacturer.
12 V ÷ 690 V
Max. 30 s
<1s
0 ÷ 400 Hz
Acoustical and LED indication
0 ÷ 500 k W
400 m A
for tripping 30 mA RCD
Single-Pole Phase testing
Two-Pole Phase
Sequence testing
>100 V AC
LED bargraph
12V, 24V, 48V, 120V, 230V, 400V, 690V
CAT IV 1000 V
IEC/EN 61243-3
DIN VDE 0682-401
IEC 61010
GS38
IP65
For outdoor use:
Water jet and dust tight protection
2 x 1.5 V Type AAA Micro
200 g
238 x 70 x 30 mm
6
MD 1000-LED