Switching Off The Engine; Technical Data; Connecting To Earth - EINHELL STE 800/1 Bedienungsanleitung

Anleitung STE 800-1 SPK 1
GB

6.3 Switching off the engine

Before you switch off the generator, allow it to run
briefly with no consumers so that it can "cool
down"
Move the ON/OFF switch (7) to position "0"
Turn the petrol cock (4) to position "0".
Important. The generator is fitted with an overlo-
ad cut-out.
This shuts down the 230V~ socket (3). You can
restart the socket (3) by pressing the overload cut-
out (6).
Important. If this happens, reduce the electric
power you are taking from the generator.

6.4 Connecting to earth

The generator must be earthed to prevent an electric
shock from electrical equipment. Connect a piece of
cable between the earth connection on the generator
and an external earth point.
7. Maintenance
Remove dust and dirt from the machine at regular
intervals. The best tools for cleaning are a fine
brush or a cloth
Do not use any caustic substances to clean the
plastic
Take the petrol mixture out of the generator if you
do not intend to use the generator for a lengthy
period of time
Important. Switch off the machine immediately
and contact your service station:
In the event of unusual vibrations or noise
If the engine appears to be overloaded or misfires
If the emissions are too dark or too light
6
27.04.2004 12:33 Uhr

8. TECHNICAL DATA

Generator
Protection type
Continuous power S1 650 VA / 650 W
Maximum power S2 15 min. 800 VA / 800 W
Rated voltage
Rated current
Frequency
Drive engine design 1-cyl. 2-stroke, air-cooled
Displacement
Max. power 0.95 KW / 1.3 hp
FuelMixture
Tank capacity
Consumption at 3/4 load
Weight
Sound power level LWA
Sound pressure level LWM
Spark plug: NGK BPR5ES
Seite 6
Synchronous
IP 23
230 V / 1
2.8 A / 1
50 Hz
63 cc
1:50 (2%)
4.0 l
approx. 0.7 l/h
20.5 kg
92 dB(A)
88 dB(A)