Klarstein 10033600 Bedienungsanleitung Seite 69

• As for the models with functions of WiFi or wired controller, the indoor unit must has
been controlled by standard remote controller under auto mode first, and then the
function of adjustable temperature under auto mode can be realized by APP or the
wired controller.
• This remote controller can adjust the temperature under auto mode. When matching
with the unit which is without the function of adjustable temperature under auto
mode, the set temperature under auto mode may be invalid, or the displayed set
temperature on the unit is not same as that on the remote controller under auto
mode.
POWER - Switching the device on and off
• Press the POWER button to turn on the unit.
• Pressing this button again turns off the power.
MODE - Modus
Press the MODE button repeatedly to select the desired operating mode:
AUTO COOL
• If you have selected the automatic mode, the device runs according to the
measured temperature. You can adjust the fan speed by pressing the FAN key. You
can adjust the swing angle by pressing one of the two SWING buttons
. In automatic mode, the temperature can be displayed; in automatic mode, the set
temperature can be adjusted.
• If you select the cooling mode, the unit will run in the cooling mode accordingly.
The cooling icon
available). Press the ARROW KEYS to adjust the temperature. You can adjust the
swing angle by pressing one of the two SWING buttons
• If you select the dry mode, the air conditioner runs at low speed in the dry mode.
The dry indicator
this indicator may not be available). The fan speed cannot be adjusted in dry mode.
You can adjust the swing angle by pressing either of the two SWING buttons
or .
DRY FAN
is displayed on the unit (for some models, this may not be
on the indoor air conditioner screen is on (for some models
HEAT
or
or .
EN
69