Step 1 Connection - Panasonic DMR-ES15 Bedienungsanleitung

STEP 1 Connection

Make sure to use the pair of supplied RF coaxial cables
Use the pair of supplied RF coaxial cables only when you make connections to the unit through the RF IN and RF OUT terminals. Striping may
appear and disrupt images on the TV if you use different cables for connection.
Using a fully wired 21-pin Scart cable
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➔ page 38).
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television (➔ page 50).
"AV1 Output" in the Setup menu (➔ page 40)
Required setting
• Before connection, turn off all equipment and read the appropriate operating instructions.
• Select the connection pattern that matches your environment from patterns A-D. Confirm connections not listed below with your
dealer.
Connecting a television
To the aerial
Aerial
cable
RF coaxial
cable
(included)
Connecting a television and VCR
To the aerial
RF coaxial cable
Aerial cable
Required setting
RQT8318
"AV2 Input" and "AV2 Connection" settings in the
8
Setup menu (➔ page 41)
8
Television's rear panel
VHF/UHF
RF IN AV IN
RF coaxial cable
(included)
Television's rear panel
VHF/UHF
RF IN AV IN
RF coaxial cable
(included)
(included)
AV OUT
VHF/UHF RF OUT
RF IN
VCR's rear panel
Connecting a terminal other than
the 21-pin Scart terminal
(➔ page 10)
Fully wired 21-pin
Scart cable
Connecting a terminal other than
the 21-pin Scart terminal
(➔ page 10)
AC mains lead
(included)
Connect only after all other
Fully wired 21-pin
connections are complete.
Scart cable
Connect the unit directly to the television
Video signals fed through video cassette recorders will
21-pin Scart cable be affected by copyright protection systems and the
picture will not be shown correctly on the television.
To household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
This unit's rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
This unit's rear panel
Television
This unit
VCR
Television
VCR
This unit