Check, Change Or Delete A Programme; Vps/Pdc Function - Panasonic DMR-ES15 Bedienungsanleitung

Timer recording
Refer to the control reference on page 18.

Check, change or delete a programme

Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons
Timer recording standby is activated.
This programme is currently recording.
The times overlap those in another
W
programme. Recording of the programme
with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer
recording. The icon disappears the next
time the timer programme starts recording.
The disc was full so the programme failed to
F
record.
The material was copy-protected so it was
not recorded.
The programme did not complete recording
X
because the disc is dirty or some other
reason.
■ To change a programme
Press [e,r] to select the programme and press [ENTER]. (➔ page 19, Manually programming timer recordings, step 3)
■ To delete a programme
Press [e,r] to select the programme and press [ ].
■ To exit the timer recording list
Press [PROG/CHECK].
• Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

VPS/PDC function

VPS (Video Programme System) or PDC (Programme Delivery Control) is a very convenient system which records exactly from beginning to end
of the TV programmes set in timer recording, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension
of the programme duration. Also, if a programme is interrupted, for example, some special news is inserted, the recording will be paused
automatically and resumed when the programme continues.
When VPS/PDC recording
When the VPS/PDC signal drops out
because the broadcast signal is weak.
When a TV station does not transmit a
regular VPS/PDC signal.
If the start times of scheduled
programmes listed in the newspaper or
magazine change at a later date.
Note
• The beginnings of recordings may not be recorded correctly in some cases.
• Depending on the signals sent from the TV stations, the VPS/PDC system may not work property even when "VPS/PDC" has been set to "ON".
• Please check with the broadcasters in your area for details.
• VPS/PDC does not activate while this unit is on. The system stays inactive under the condition even if its setting is "ON". In such cases,
recording starts and finishes at times you set initially.
RQT8318
20
20
Timer Remain
Recording
No. Name Date Start Stop
01 ARD 7. 5. SUN 19:00 20:00
New Timer Programme
Press ENTER to store new programme.
ENTER
S SUB MENU CANCEL
RETURN
• Use VPS/PDC time for recording the TV programmes.
• Set "VPS/PDC" to "OFF" when the recording time is not VPS/PDC time.
• VPS/PDC recording is not performed when VPS/PDC time is incorrect, even if only by one
minute. To find out VPS/PDC time, consult Teletext, a newspaper or magazine, or other source.
– If a programme listed in a newspaper or magazine has two S
S V number for VPS/PDC if you wish to proceed with VPS/PDC recording using
HOW IEW
S V programming.
HOW IEW
– The default setting for "VPS/PDC" is "OFF".
Timer recording will be performed in the normal mode (without VPS/PDC) even if it was
programmed for VPS/PDC.
In this case, even if the timer recording is performed, whatever has been programmed will not be
cancelled at that particular time but at 4 a.m. two days later.
Set "VPS/PDC" to "OFF" when programming a programme whose start time has been
subsequently changed.
Message displayed in the "Drive space" line
OK: Displayed if the recording can fit in
the remaining space.
1:57 SP
(Date): For recordings made daily or
8:17:23 7. 5. SUN
VPS Drive
weekly, the display will show until
Mode
PDC space
SP -- - OK when recordings can be made (up
to a maximum of one month from
the present time) based on the
time remaining on the disc.
!: It may not be possible to record
because:
• the disc is write-protected
Timer Off A
• there is no more space left
• the number of possible titles has
reached its maximum.
HOW
V numbers, use the
IEW