Tv System - Panasonic DMR-ES15 Bedienungsanleitung

Automatic setting
You can restart auto channel setting if the channel reception setting
(➔ page 11) fails for some reason.
After performing steps 1–4 (➔ page 42)
5
Press [e,r] to select "Auto-Setup
Restart" or "Download from TV" and
press [ENTER].
The confirmation screen appears.
Select "Download from TV" when you connect the unit to a
Q Link-compatible TV with a fully wired 21-pin Scart cable.
(Programme positions are downloaded from the TV and
copied through this convenient function.)
6
Press [w,q] to select "Yes" and
press [ENTER].
• If the Country setting menu appears on the television
Press [e,r,w,q] to select the country and press [ENTER].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [2 CH] and [CH 1] on the main unit until the
Country setting screen appears.
• All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording
programmes are also cancelled.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
List of TV Reception Channels
Channel
Indication Germany/Italy
2-4
5-10, G-J (172.00
E2-E10
5-10
E11-E12
11-12 (Germany)
H1-H2 (Italy)
13-20 A-H (Only Italy)
21-69 E21-E69
74-78 S01-S05
80 S1
81-89 S2-S10
90-99 S11-S0
S21-S41
121-141
(Hyperband)
Only for 8 MHz channel raster
TV Channel
France Other Countries
2-4
to 220.00 MHz)
(INTER BANDE) E2-E12
–
– –
E21-E69 E21-E69
– S1-S5
– M1
B-F (100.00 to
172.00 MHz) M2-M10
(INTER BANDE)
K-Q (220.00 to
300.00 MHz) U1-U10
(INTER BANDE)
S21-S41 (299.25
S21-S41
to 467.25 MHz)
(Hyperband)
(INTER BANDE)

TV System

Refer to the control reference on page 36.
Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1
While stopped
Press [FUNCTIONS].
2
Press [e,r] to select "To Others" and
press [ENTER].
3
Press [e,r] to select "Setup" and
press [ENTER].
4
Press [e,r] to select "Connection"
and press [q].
5
Press [e,r] to select "TV System"
and press [ENTER].
6
Press [e,r] to select the TV system
and press [ENTER].
TV System
Setup
PAL
Tuning NTSC
Disc
Picture
• PAL (factory preset)
– Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are played
as PAL 60.
– Select to record television programmes and PAL input from
other equipment.
• NTSC
– Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
– Select to record NTSC input from other equipment.
The confirmation screen appears.
7
Press [w,q] to select "Yes" and press
[ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
■ To change the setting all at once (PAL
While stopped, press and hold [g] and [; OPEN/CLOSE] on the
main unit at the same time for about 5 seconds.
NTSC)
RQT8318
43
43