After Use; Cleaning And Maintenance - Beurer HC 60 Gebrauchsanweisung

After each use/at each break, always switch off the hair dryer at the blower switch [6] (setting 0)
> For your safety, the device switches off automatically if it overheats.
> Pull the mains plug out of the socket and allow the device to cool down.
> Before switching on again, check the air outlet [2] and the filter [3] for blockage (e.g. fluff, dust and hair
that has been sucked in).
> Do not place the device on or near wet towels after use.
Note
For best results with the ion technology, use the hair dryer without an attachment.
Selecting the function
The hair dryer has a cool setting that can be selected using the cold air button [4]:
Function Description
The cold setting provides the perfect finish for styling. It cools your hair down
and adds hold for an improved result.
The cold setting can be activated at any time by pressing the button [4]. Once
you press the button again, the device returns to the previously selected heat
setting.
Accessories
The following attachments are supplied:
• Volume diffuser [1]: gives the style volume and tone.
• Professional nozzle [11]: allows you to style and shape your hair exactly how you want it.

After use

• After each use, pull the mains plug out of the socket.
• Allow the device to cool down.
• Do not wind the mains cable around the device!
• Store the device in a dry place out of the reach of children.
• The device can be hung on a hook using the hanging eyelet [9].

8. Cleaning and maintenance

Cleaning
Important
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device! Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
18