What If There Are Problems; Disposal; Technical Specifications - Beurer HC 60 Gebrauchsanweisung

Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in a dishwasher.
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.
• The casing of the hair dryer and the accessories may be cleaned with a soft cloth dampened with
warm water.
• Before each use, remove any fluff, dust and hair from the air outlet [2] and the filter [3] using an
appropriately sized brush.

9. What if there are problems?

Problem:
The air flow does not become warm enough
Automatic switch-on function does not work

10. Disposal

For environmental reasons, do not dispose of the device in the household waste
at the end of its useful life.
Dispose of the device at a suitable local collection or recycling point.
Observe the local regulations for material disposal.
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.
You can obtain the location of collection points for old devices from the local or municipal authori-
ties, local waste disposal company or your dealer, for example.

11. Technical specifications

Weight
Voltage supply
Power consumption
Protection class
Ambient conditions
Permissible temperature range
Subject to technical changes.
Solution:
Please check that the cold air setting is not
activated
Set the device to standby mode (the LED
should light up red). Now grip the handle, and
keep your hand closed around it. The device
should now switch on.
~506 g
220-240 V~, 50-60 Hz
Max. 1400 W
II
Only approved for indoors
-10 to +40°C
19