Initial Use; Usage - Beurer HC 60 Gebrauchsanweisung

6. Initial use

Warning
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Make sure that your hands are dry! There is a risk of electric shock!
• The volume diffuser [1], the professional nozzle [11] and the hair dryer may become very hot de-
pending on the switch setting and period of use – risk of burns and fire!
• Do not touch the volume diffuser [1] and the professional nozzle [11] during use, as they will be-
come hot. Risk of fire and burns!
• Place the hair dryer on non-flammable surfaces only. Risk of fire!
• Do not place the device on or near wet towels after use. Risk of electric shock!
• Ensure that no hair can be directly sucked into the device. Risk of fire!
Important
• Do not jam the mains cable [10] in drawers or doors, for example.
• Untangle the mains cable [10] if it is twisted.
• Do not pull, twist or bend the mains cable [10] and do not pull or route it over/on sharp, pointed
objects or hot surfaces. Damaged or tangled mains cables increase the risk of electric shock!
Note
The device has a contact sensor [7]. This means that the device only turns on when you place your
hand around the contact sensor [7] on the handle and have already switched on the blower switch
[6].
Note
A slight odour initially develops after switching on the device for the first time. This is normal and not
harmful to your health. Allow the device to run for three to five minutes. After that you can use the
device as normal.

7. Usage

Drying the hair
> Switch on the hair dryer using the blower switch [6]. The operating light [8] starts to light up red
and the device starts as soon as you touch the contact sensor [7]:
1 Gentle air flow
2 Strong air flow
> Select the heat setting using the heat setting switch [5]:
1 Low temperature
2 Medium temperature
3 High temperature
> Dry and/or style your hair as desired.
17