Installation; External View - Toshiba RAV-HM561UT-E Installationsanleitung

4

Installation

REQUIREMENT
Strictly comply with the following rules to prevent damage of the
indoor units and human injury.
• Do not put any heavy article on the indoor unit. (Even units are
packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in
the indoor unit unpacked by necessity, use buffering cloth or other
soft cloth to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan,
foamed parts, or resin parts).
• Carry the package by two or more persons, and do not bundle it
with plastic band at positions other than specified.
Model RAV- A B C
HM56 type 6.4 12.7 256
HM80 type 9.5 15.9 319
HM110 type 9.5 15.9 319
HM140 type 9.5 15.9 319
97-EN
– 49 –
 External view
Ceiling bottom surface
Ceiling bottom surface
Knockout square hole for simple OA
for Dia.100
Z-sectional
view
Ceiling bottom surface
Ceiling panel (sold separately)
840 Unit outer dimensions
Electrical control box
860 to 910 Ceiling opening size
408
Z
416.5
690±20
Hanging bolt pitch
950 Panel outer dimensions
Ceiling bottom surface
Refrigerant pipe
connecting port (Liquid) A
172
112
44
Refrigerant pipe
Wiring intake
connecting port (Gas) B
Ceiling bottom
surface
Drain pipe 189
connecting port
(Material: PP)
Hanging bolt M10 or W3/8
(Locally procured)
Unit: mm
98-EN