Volpi KV100 Handbuch Seite 35

15.3 Lead screw greasing
Greasing of the pruner internal transmission have to be carried out by qualified personnel at customer
service.
Bring the tool to the customer service center after every pruning season, in order to make the correct
maintainance.
15.4 Moving blade replacement
•
Use only original blades, refer to customer assistance service to buy blades and original spare
parts.
•
With the tool connected to the battery, open the blades by pressing the trigger(1), then switch off
the battery and remove the cable (2):
• Remove the circlip (3) and the pin (4) from the moving blade actuator rod:
35