Safety Instructions; General Safety - Bluetti B80 Bedienungsanleitung

1. Safety Instructions

Read this manual for instructions on the proper use and safety information for the unit.
Follow the warnings and instructions marked on the unit and its accessories.
Pay attention to the "Instruction", "Caution", "Warning" and "Danger" symbols in this
manual, and follow the instructions carefully to avoid injury or damage.
The Safety Requirements provided herein are for illustrative purposes that include but
are not limited to those listed in this manual. Actual operation shall comply with all
applicable safety standards.
If you have any questions, feel free to contact BLUETTI support or your local BLUETTI dealers.

1.1. General Safety

•
Always operate or store the unit in the conditions specified in this manual.
•
The installation and ambient conditions must comply with the regulations in the
relevant international, national or regional standards.
•
Unauthorized disassembly, alteration of the equipment or modification of the software
code is not allowed.
BLUETTI shall not be liable for the following circumstances:
•
Equipment damage caused by force majeure, such as earthquake, fire, storm, flood,
mudslide, etc.
•
Damage or loss during transportation.
•
Damage caused by storage conditions that do not meet the requirements specified in
this manual.
•
Damage to the hardware or data of the equipment due to customer negligence,
improper operation or intentional damage.
•
Damage to the system caused by a third party or the customer, including handling
and installation that does not meet the requirements specified in this manual.
•
The product is intended for use with audio/video, information and communication
technology equipment only.
•
This product is not suitable for providing electrical service for equipment and machines
that are highly dependent on the reliability of electrical power supply and that involve
personal safety, such as atomic energy, aviation, medical, etc. Poweroak will not be held
responsible for any personal safety accidents, fire accidents, equipment failures, etc.
caused by using this product to supply power to the above equipment and machines.
•
Damage caused by adjustment, alteration or removal of identification marks.
To avoid danger, please regulate the operation in the following manner：
•
Do not install, use and maintain the unit in adverse weather conditions such as
lightning, rain, snow and strong breezes (including but not limited to handling and
operating the unit, plugging and unplugging signal connections to outdoor facilities,
working at height, outdoor installations, etc.).
05
JUST POWER ON