Panel Lock Function; When Locked; Remote Control Overview; Bd-Live Overview - Tascam BD-MP1 Bedienungsanleitung

Panel lock function

By using the lock functions, opening and closing the disc tray,
and operations using the remote control and main unit buttons
can be locked.
1. Press the HIDE MENU [SHIFT] and OPEN/CLOSE [LOCK]
buttons on the front of the unit at the same time.
The current lock status will appear on the unit display.
2. While pressing and holding the HIDE MENU [SHIFT] button
on the unit, press the OPEN/CLOSE [LOCK] button again.
o Pressing these buttons changes the status every time.
o Press the OPEN/CLOSE [LOCK] button while continuing
to press and hold the HIDE MENU [SHIFT] button until
the desired lock function appears.
Unit display indication
LOCK: T LOCK
LOCK: P LOCK
LOCK: R LOCK
LOCK: R+P LOCK
LOCK: R+T LOCK
LOCK: OFF
* Even when the main unit buttons are locked, pressing the
HIDE MENU [SHIFT] and OPEN/CLOSE [LOCK] buttons at
the same time still works.

When locked

If operation of the front panel is attempted when the front
panel is locked, " " will appear on the display and that
LOCKED
operation will not be executed.
NOTE
i If the disc tray is locked using
LOCK: R+T LOCK
it once will be possible. After that, the disc tray will be locked.
i Turning the power on again will be possible even if the
power is turned off while the unit is locked. The unit will
remain locked after it starts up.
Lock status
Disc tray locked
Main unit buttons locked*
Remote control locked
Remote control and main unit
buttons locked*
Remote control and disc tray
locked
Unlocked
or
LOCK: T LOCK
while the tray is still open, closing

Remote control overview

This unit can be controlled remotely by connecting it to a
computer, either by connecting their RS-232C ports with an RS-
232C cable or by connecting the unit's ETHERNET to a LAN port
on the computer with a LAN cable.
p For details about this unit's communication and command
protocols for ETHERNET and RS-232C, refer to the BD-MP1
download page of the TASCAM website (https://teac-global.
com/).

BD-Live overview

This unit supports BD-Video (BD-ROM Profile 2.0) with BD-Live
functions.
By connecting this unit to the Internet, this function can be
used to enable additional content, including special videos and
subtitles.
p The various functions that can be used with BD-Live depend
on the disc. Refer to the screen display and explanations of
the disc for details about those functions and operations.
p To use BD-Live functions, connect this unit to the Internet
and make the necessary settings. See "Network connection
overview" on page 36 for connection procedures, and "See
"Network" on page 20 for setting procedures.
p Depending on the disc, changing the settings described in
"Network" on page 20 might be necessary.
p If the BD-LIVE Connection setting is "Prohibited" in "Network"
on page 20, BD-Live content will not be able to access the
Internet.
p Depending on the network setup being used, network
connection might take some time or might not even be
possible.
p During playback of discs that support BD-Live, identification
data for the unit or disc might be transmitted to the content
provider.
To limit Internet connection, change the "Network" on page
20 settings described on page 17.
27
TASCAM BD-MP1