Tascam BD-MP1 Bedienungsanleitung Seite 20

Security
Function
Change Password
Parental Control
Country Code
Network
Function
Internet Connection
Interface
Information
Connection Test
IP Setting
Wireless Setting
BD-Live BUDA
20
TASCAM BD-MP1
Options
More...
More...
More...
Options
Enable/Disable
Ethernet/Wireless
More...
More...
Auto/Manual
More...
p BUDA Information
p BUDA Setup
Explanation
A password can be set for the unit.
p The password is a 4-digit number.
p The default password is "0000".
Set the age rating restriction for discs.
A password must be input to change this.
p The default setting is "Off".
Set the country to use for Parental Control.
A password must be input to change this.
Explanation
Enable or disable Internet connection for the unit.
Set the method of Internet access for the unit to "Ethernet" or
"Wireless".*
When using "Wireless", after responding "Yes", select from the
following connection methods.
p Scan: The unit will search for access points, allowing selection of
a network.
p Manual: An SSID can be set manually to connect.
p Auto: Connection is possible using Wi-Fi Protected Setup (WPS)
standards.
The following information related to the Internet connection is
shown:
p interface, address type, IP address, subnet mask, gateway, DNS1
and DNS2.
This tests the network connection.
Select how the unit's IP address is set.
p Auto: Automatically acquire the IP address from a DHCP server.
p Manual: Manually input the interface, address type, IP address,
subnet mask, gateway, DNS1 and DNS2 numbers.
Use this to make wireless connection settings.*
p Scan: The unit will search for access points, allowing selection of
a network.
p Manual: An SSID can be set manually to connect.
p Auto: Connection is possible using Wi-Fi Protected Setup (WPS)
standards.
Set the storage location used to save BD-Live contents.
p BUDA Information
o This shows the amount of open space in the storage location
used to save content.
o Press the ENTER button to show the "Fmt buda" button, and
press the ENTER button again.
This creates a BUDA folder in the selected storage location.
p BUDA Setup
The storage location used by BUDA can be set to an external
device or the internal storage.
o External: A USB flash drive connected to the unit will be
used.**
o Onboard: The internal storage of the device will be used.