Rear Panel - Tascam BD-MP1 Bedienungsanleitung

Button combinations and the unit's behavior
Button combination
SHIFT
-
SHIFT
8
SHIFT
y
SHIFT
9
SHIFT
m
SHIFT
,
y 8
y 9
y
m
y ,

Rear panel

e r
e ANALOG OUT (BALANCED) L/R jacks
These are balanced XLR analog output jacks.
These transmit audio signals to external speakers and
amplifiers, for example. Use XLR cables for connection.
r ANALOG OUT (UNBALANCED) L/R jacks
These are unbalanced RCA analog output jacks.
These transmit audio signals to external speakers and
amplifiers, for example. Use RCA cables for connection.
t 7.1 audio out (unbalanced) jacks
These are 7.1 unbalanced RCA analog output jacks.
These transmit 8 channels of audio signals to a 7.1 surround
system. Use RCA cables for connection.
y DIGITAL OUT (COAXIAL) connector
This is a coaxial digital audio output connector.
This transmits digital audio signals to a television. Use a
coaxial cable (75Ω) for connection.
u HDMI OUT port
Audio/video signals are transmitted from the HDMI port. Use
an HDMI cable for connection.
12
TASCAM BD-MP1
Button press Behavior
Simultaneous press Changes the LOCK setting.
Simultaneous press Confirms or selects menu items.
Simultaneous press j (down)
Simultaneous press k (up)
Simultaneous press
l (left)
Simultaneous press
; (right)
Simultaneous press Displays the HOME screen.
Simultaneous press Displays the top menu/title menu of the disc.
Simultaneous press Selects repeat modes.
Simultaneous press Plays back a defined section between point A and B repeatedly.
t y u i o
i USB port
Connect/disconnect USB flash drives here.
Audio, video and other files can be played back from a
connected USB flash drive. Moreover, this can be used to load
update files for firmware updates.
o ETHERNET connector
This is an Ethernet port.
Use to connect this unit to a network and to control it from a
computer.
Moreover, BD-Live contents can also be accessed with an
Internet connection. Use an STP cable that is category 5e or
higher for connection.
p RS-232C connector
This is a 9-pin D-sub RS-232C control input/output connector.
A computer can be used to control this unit by connecting to
it with an RS-232C cable.
a AC IN connector
Connect the included power cord here.
V CAUTION
Always use the included cord to supply power to this unit.
Use of a different one could cause malfunction, fire or electric
shock.
p a