Display; Preparing The Remote Control; Installing Batteries; When To Replace Batteries - Tascam BD-MP1 Bedienungsanleitung

Display

1
BD
7
T00 C00 00001
3 4
1 Type of disc in tray
This shows the type of disc loaded in the tray of the unit.
i Blu-ray disc: ,
BDMV BDAV
i DVD disc:
DVD
i Audio CD:
CD
i No disc loaded:
NO DISC
2 Connected media
These appear when a USB flash drive or SD card is connected
to the USB port or the SD card slot on the unit.
3 Media operation status
When the unit is playing or paused, an icon appears here.
i During playback: 7
i When paused: 9
4 Title/chapter/track
When the unit is playing or paused, title/chapter/track
information appears here.
i Title/track:
T00
i Chapte:
C00
5 Various information
o This shows the position in the media item order shown on
the Media page of the HOME screen.
appears when on the Settings page of the
o
SETUP
HOME screen.
o Various information is shown in response to different
operations.
i When a USB flash drive is connected:
i When a USB flash drive is disconnected:
i When the STOP button is pressed:
i When the TITLE/POP UP button is pressed:
i When the disc tray is open:
i When the disc tray is closed:
i When a medium is recognized:
i When playing back:
00:00:00
o Other information shown
i When the title menu of a disc that contains multiple
titles is open:
ROOT
i When the title menu of a purchased or rental video disc
is open:
TOP
i During a firmware update:
i Volume adjustment:
VOL 0
Adjustment range (−41 min. – 0 max.)
2
USB SD
5
USB IN
USB OUT
STOP
POP
OPEN
CLOSE
LOAD
UPGRADE

Preparing the remote control

Installing batteries

1.
Open the cover on the back.
2. Insert two AAA batteries, being certain to use the correct
¥ and ^ orientations.
3.
Close the cover.

When to replace batteries

Replace both batteries with new ones if the distance from the
main unit that the remote can be used decreases or if the unit
stops responding to the remote buttons.

Battery precautions

Misuse of batteries could cause them to leak or rupture, for
example. Carefully read and follow the battery caution labels.
(see "CAUTIONS ABOUT BATTERIES" on page 6)

Using the wireless remote control

See "Wireless remote control (TASCAM RC-BDMP1)" on page
13 for the button functions.
When using the remote control, point it toward the receiver on
the unit and use it within the range shown below.
Remote control signal receiver
Remote control operation range
From any angle within 15° of front: 5 m
ATTENTION
i Operation might not be possible if there are obstacles.
i Remove the battery if not using the remote control for a long
time (a month or more).
i It battery fluid should leak, wipe away any fluid inside the
case thoroughly and install a new battery.
i When using other devices that can be controlled by infrared
rays, operation of this remote control could cause those
devices to function improperly.
25
TASCAM BD-MP1