Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
English
Fault
Machine does not drive along. Coupling cable for drive system not adjusted
Excessive vibration.
Gears can only be changed
with difficulty.
(STH 5.56, STH 8.66, STH
10.66 C).
1
)
see "Engine instructions"
2
)
have these tasks carried out only by a specialist workshop
26

Possible cause

correctly.
V-belt slack or torn (STH 5.56, STH 8.66,
STH 10.66 C).
Drive system iced up (STH 5.56, STH 8.66,
STH 10.66 C).
Friction-wheel rubber torn.
Loose parts or damaged worm.
Coupling cable for drive system not correctly
adjusted.
Shift lever not correctly adjusted
(STH 10.66 C) .
Drive system iced up (STH 5.56, STH 8.66,
STH 10.66 C).
Operating Manual – Snowthrower
Action to take
Adjust coupling cable (see "Adjust coupling
for the drive system").
Have slack V-belt tightened
Have torn V-belt replaced
Remove ice accumulation (see "Checking the
drive system").
Have friction-wheel rubber replaced
Stop engine immediately and pull off spark-
plug connector. Tighten loose bolts and
nuts.Have damaged worm repaired
Adjust coupling cable (see "Adjust coupling
cable for the drive system").
Adjust shift lever (see "Adjusting the shift
lever").
Remove ice accumulation (see "Checking the
drive system").
2
).
2
).
2
).
2
).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis