EINHELL HR 1700 F Bedienungsanleitung Seite 9

Anl. HR 1700 F 12-spr.
Layout
1. On/Off switch
2. Power cable with plug
3. Water outlet
4. Water inlet + filter
5. Pistol
6. High-pressure hose
7. Lance
8. Foam spray attachment
1
2
5
7
08.11.2001 13:24 Uhr
3
4
6
8
Seite 9
Installation
1. The main switch has to be in position '-O-'.
2. The water supply hose (item 2) has to be
connected to the INLET (item 4). Use a hose of
at least 13 mm (1/2") inner diameter designed for
a minimum capacity of 15 bar.
3. Plug the lance on the pistol.
4. Connect the high-pressure hose (item 5) to the
OUTLET (item 6). The water temperature is not
to exceed 60°C in continuous operation.
5. Turn on the water tap (item 3).
6. Press the pistol trigger (item 7) until water
emerges from the lance nozzle and flushes out
any residues from the pipe work.
7. Insert the power plug in the socket-outlet
(item 8).
8. Switch on the machine by moving the switch to
position '-I-'. Before switching on, press the pistol
trigger. Starting is then easier and the machine is
placed under less strain.
Water connection diagram
GB
9