Installing The Tumble Dryer - Miele PDR 516 SL EL Installationsplan

Unscrew Torx screws (Torx T 20 and T 30) from the wooden pallet

and remove the wooden battens.
Remove the wooden battens.

Lift the tumble dryer with the pallet truck.

Fit the 4 adjustable feet supplied.


Installing the tumble dryer

Place the tumble dryer on a perfectly level, secure and horizontal

surface that is able to withstand the specified floor load.
The floor load created by the tumble dryer is concentrated and
transferred to the installation surface via the machine feet. A base is
not required. However, an uneven floor surface must be com-
pensated for.
en - Installation notes
19