Ikra IEAS 750 Gebrauchsanweisung Seite 33

8. Technical specifications
Electric branch saw IEAS 750
Rated Voltage
Nominal Consumption
No-load Speed
Guide Bar
Cutting length
Variable height adjustment
Working height
Chain speed
Oil
Weight with bar+chain
Chain type
Guide Bar type
Class of Protection
Sound Pressure Level L
Sound power level L
WA
Vibration EN ISO 11680-1:2021
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: The noise pressure level must be reduced depending on use and the tasks to be completed so that the health of
the operator is not impaired. The noise pressure level at the place of work can exceed 80 dB(A). In such cases the
operator will require noise protection (e.g. wearing of ear protectors).
Wear hearing protection. The influence of noise can cause hearing loss.
Attention!
The vibration value will change on the basis of the area of application of the electric tool and may lie above the
specified value in exceptional situations.
Warning: The actual vibration emission value present during use of the machine may deviate from the values indica-
ted in the operating manual or by the manufacturer. In order to be exact, an appraisal of the level of strain for all work
phases during actual use must be considered, e.g. the times that the tool is switched off, idling, and during which it is
not in use. In this way, the level of strain may be reduced significantly during the complete working period.
If the tool is regularly, you should wear anti-vibration gloves and avoid an ambient temperature of 10°C or lower while
working with it.
Create a work plan to spread the use of high-vibration tools across multiple days.
Ensure the lowest possible vibration of the device by completing regular maintenance and stable parts on the device.
Replace worn out components immediately.
The indicated vibration emission value has been measured according to a standardised testing process, and may be
used for a comparison with another electrical tool.
Attention: Noise protection! Please observe the local regulations when operating your device.
GB | Operating Instructions
EN ISO 11680-1:2021
pA
230-240 V ~ / 50 Hz
750 W
-1
6000 min
203 mm / 8"
185 mm
from 185 cm to 268 cm
up to 4 m
11,2 m/s
90 ml
3,5 kg
ALP-50-33S/Kangxin
AP08-33-507P/Kangxin
II
89 dB(A)
K = 3 dB
104 dB(A) K = 3 dB
2
2,61 m/s 2
K = 1,5 m/s
12