Ikra IEAS 750 Gebrauchsanweisung Seite 22

Electric branch saw IEAS 750
Content
1. Intended use
2. General safety regulations
3. Explanation of symbols
4. Description of the machine and scope of delivery
5. Assembly
6. Operation
7. Working with the high pruner
8. Technical data
9. Maintenance
10. Cleaning and storage
11. Information for environmental protection / disposal
12. Repair Service
13. Ordering spare parts
14. Fault remedy
Warranty
Declaration of conformity
Packaging
This machine is packaged to prevent damage during transportation. The packaging is raw material and can thus be
reused or fed back into the raw materials cycle.
When using the machine certain safety precautions must be taken in order to prevent injuries and damage:
• Read through the operating instructions carefully and observe the instructions contained therein. Familiarise your-
self with the machine, its correct use and the safety devices by means of these operating instructions.
• Store these carefully so that the information is always available to you.
• In the event of the machine being handed over to another party, please include these operating instructions with it.
We accept no liability for accidents and damage caused as a result of disregarding these instructions.
Intended use
1.
The high pruner is intended exclusively for pruning trees and / or other woody plants from the ground. The diameter
of the branch to be cut must not exceed the cutting length of the chain-sword. Intended use also includes reading and
observing the operating instructions before and during each use, as well as observing the warnings on the machine.
Before and during use, check the pole pruner for mechanical damage. If repairs are necessary, contact your dealer.
Only original spare parts approved by the manufacturer may be used. If non-approved or non-original spare parts are
used and this results in personal injury or damage to property, the operator and not the manufacturer is liable. The pole
pruner may only be operated in the open garden area at an ambient temperature of not less than 10°C.
Any other use, such as sawing plastic, masonry or building materials that are not made of wood, is im-
proper use. Working contrary to the intended use can lead to dangerous situations.
Residual risks
Note that national regulations like occupational protection, environmental protection may limit the use of high pruner.
Residual risks remain even if you use this tool as intended. The following hazards can occur due to this tool's con-
struction and design:
1. Lung damage if a suitable dust mask is not worn.
2. Hearing damage if suitable hearing protection is not worn.
3. Cuts if suitable protective clothing is not worn.
4. Damage to health, which results from hand and arm vibrations if the device is used for an extended period or not
operated or maintained properly.
Warning! This machine generates an electromagnetic field when operated. This field can affect active or passive med-
ical implants in certain circumstances. In order to reduce the risk of severe injury or death, we recommend that people
with medical implants consult their doctor or the manufacturer of the medical implant before operating the machine.
GB | Operating Instructions
1
Translation of the original Operating Instructions