Temperature Mode; Timer; Switching Off - CASO DESIGN Pro Menu 2400 Original Bedienungsanleitung

14.4.4

Temperature Mode

 Press the Function Key 3. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
 With the + / - keys, you can change the settings at any time in a range from 60 –
240°C. (Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and
240°C).
 Please note that the two functions of level and temperature can be chosen as
alternative . You can either work with the power levels or with the temperature
stages. The most recently selected function is active.
 The temperature is measured by a sensor below the glass ceramic plate, therefore
the displayed temperature can deviate from the temperature in the pot.
Please note
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection "E05" will be activated.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than 160°C.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than level 10.
14.4.5

Timer

 Timer Function. Press the button Timer 2. With the +/- keys, you can now select the
operating time in 1-minute intervals (up to max. 180 minutes).
 Once the time is up, an acoustic signal sounds and the device automatically goes
into standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
14.4.6

Switching Off

 When you switch off the device via "On/Standby" and the temperature of the cooker
plate surface is lower than 50°C, the display shows „L". When the temperature of the
cooker plate surface is over 50 °C, it is displaying „H".
Please note
► Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
► Do not operate the device if it is damaged in any way or does not function properly.
caso Pro Menu 2400 39