Retrofitting A Plux (Only For Item 73120) - roco BR 03.1073 DB Handbuch

▪ Retrofitting a Plux decoder (only for Item 73120)
First remove locobody (fig. 1). Then remove the
jumper from the interface. Finally put the plug of
the chip into the interface as shown.
73120.indd 35 73120.indd 35
}
siehe
1.
Fig. 1
see
voir
Decoder 16-pin
10895 / 10893
35
08.04.2021 09:43:58 08.04.2021 09:43:58