Storage; Disposal And Recycling; Troubleshooting; Possible Cause - Scheppach 5904403901 Original Bedienungsanleitung

12. Storage

• Store the device and its accessories in a dark,
dry and frost-proof place that is inaccessible to
children.
• The optimum storage temperature is between 5
and 30˚C.
• Store the electrical tool in its original packaging.
• Cover the electrical tool in order to protect it from
dust and moisture.
• Store the operating manual with the electrical tool.

13. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be re-
used or recycled. The equipment and its ac-
cessories are made of various types of mate-
rial, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.

14. Troubleshooting

The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work-
shop.
Fault

Possible cause

Collection box not in correct position
Motor does not start Motor is overloaded.
No electricity
Blade cylinder rotates anti-clock-
wise.
Garden waste is not
drawn in. No electricity
Blade cylinder has become blocked.
Shredding material is
Counter blade is not set correctly.
tangled.
26 | GB
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of waste
equipment may have negative consequences for the
environment and human health due to potentially
hazardous substances that are often contained in
electrical and electronic equipment. By properly dis-
posing of this product, you are also contributing to the
effective use of natural resources. You can obtain in-
formation on collection points for waste equipment
from your municipal administration, public waste dis-
posal authority, an authorised body for the disposal of
waste electrical and electronic equipment or your
waste disposal company.
Remedy
Insert the collection box correctly and check the
locking device (see Operation).
Turn the shredder on again (see Operation).
Have the socket, cable, lead and plug checked by a
trained electrician (see Electric connection).
Change the rotational direction (see Operation).
Push shredding material with special pushing de-
vice for shredder.
Remove blockage (see Operation).
Re-adjust counter blade (see Operation).
www.scheppach.com