Sharp LL-T1501A Bedienungsanleitung Seite 26

Instructions for installing a VESA compliant arm
9. Being careful not to damage the monitor, spread
out a soft cloth and lay the monitor on it display-
side down.
10.Remove the four screws and then remove the
stand from the monitor.
Information
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
All manuals and user guides at all-guides.com
26
11.Attach the arm to the monitor with four screws.
Information
4 ~ 6 mm
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
12.Connect the AC adapter (purchased separately).
Connect the AC adapter's DC plug to the AC
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
AC adapter connection terminal
9
0
Screw used to
attach arm
Arm
Part of monitor
to which arm is
attached
w
q