Siemens SIGUARD LS4-4 Anleitung Seite 41

ID-code
I/O code
Slave address
Cycle time as defined by AS-i specifica-
tions
Sensor response time
AS-Interface system response time
Further technical data see "Technical description" SIGUARD Laserscanner LS4.
a Axis of the rotating mirror
b Scanning plane
Fig. 7.0-1: Dimensional drawing of LS4 AS-Interface
B
0 (four data bits as outputs)
Programmable AS-Interface address:
1...31 (set to 0 at factory)
5 ms
Twofold evaluation 85 ms (corresponding
to 2 scans), may be set for up to 16 scans
(645 ms)
Sensor response time + max. 40 ms
41