Moving The Ro 400 - Electrolux RO 400 Handbuch

Moving the RO 400

If you move the water purifier to a different location, you
should bear in mind the following points:
• Shut the valve on the cold water supply pipe.
• Disconnect the electrical plug from the socket.
• Always transport the appliance in its normal upright
position .
• To re-install it, follow the original installation
instructions, including the flushing procedure, in order
to flush out any old water.
• The appliance will only need to be recalibrated if the
quality of the water supply has been changed, or if the
membrane has been replaced.
If the appliance is to be stored without being used
for 4 months or longer, or if it is to be
disconnected from the water and electricity
supplies for several days, it should be filled with
the special storage product (preservative). See the
section "Storage" on page 65.
INSTALLATION
57