Werbung
Verfügbare Sprachen
Verfügbare Sprachen
28 | English
Symbols and their meaning
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is a stationary machine for cutting in a
straight line with and against the grain in hardwood, soft-
wood, chipboard and fibreboard. It is possible to cut mitre
angles of –47° to +47° and bevel angles of 0° to +45°.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Slide device
a)
(2)
Dust bag
(3)
Chip ejector
(4)
Transport handle
(5)
Depth stop adjusting screw
Laser protection cap
(6)
(7)
Lock-off function for on/off switch
(8)
On/off switch
(9)
Handle
(10)
Protective guard
(11)
Retracting blade guard
(12)
Guide roller
(13)
Fence
(14)
Saw table extension
(15)
Clamping screw for saw table extension
Technical data
Sliding mitre saw
Article number
1 609 92A 6ST | (09.07.2021)
(16)
Assembly holes
(17)
Saw table
(18)
Insert plate
(19)
Locking knob for all mitre angles
(20)
Mitre pre-setting lever
(21)
Tilt protector
(22)
Angle indicator for mitre angles
(23)
Detents for standard mitre angles
(24)
Scale for mitre angles
(25)
Adjustable fence
(26)
Screw clamp
(27)
Chip deflector
(28)
Stop for standard 45° bevel angle
(29)
Stop screw for 45° bevel angle
(30)
Depth stop
(31)
Clamping handle for all bevel angles
(32)
Locking screw for slide device
(33)
Spindle lock
(34)
Rechargeable battery
(35)
Rechargeable battery release button
(36)
Transport safety lock
(37)
Scale for bevel angles
(38)
Angle indicator for bevel angles
(39)
Stop screw for 0° bevel angle
(40)
Stop for standard 0° bevel angle
(41)
Hex key (5 mm)
(42)
Hex socket screw for mounting the saw blade
(43)
Clamping flange
(44)
Saw blade
(45)
Inner clamping flange
(46)
SDS bolt
(47)
Locking screw for the adjustable fence
(48)
Threaded rod
(49)
Holes for screw clamp
(50)
Laser beam outlet aperture
(51)
Screws for insert plate
(52)
Set screw for laser positioning (parallelism)
(53)
Screw for bevel angle indicator
(54)
Screw for mitre angle indicator
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GCM 18V-216
3 601 M41 000
3 601 M41 040
GCM 18V-216
3 601 M41 0B0
Bosch Power Tools
Werbung
