Werbung
Verfügbare Sprachen
Verfügbare Sprachen
At the boundary of the
reception area
If you leave the area of
coverage of all programmed
transmitters, you will hear a
warning (Warnton). Moreover,
the INFO indicator will fade
and the display will show
0000'. This is relevant if the
volume control is at minimum
or during cassette playback.
You should switch to another
PROGRAMMING MCC
Programming the MCC system
]
Note: If your dealer has already
programmed the radio for you,
you can skip this chapter.
FM transmitters
Turn the radio on; the display
will light up.
2 Depress the button STORE.
transmitters. In the column at
The STORE indicator will light
the right of the map they are
up for 5 seconds.
INFO programme now.
Switching off the INFO: The
co-programmed INFO mode
can be switched off temporarily
by briefly depressing the INFO
button. This facility can be
uséd when you do not want a
playback of a favourite
cassette interrupted by traffic
information.
Volume at minimum
stations other than those you
want, including foreign
transmitters.
should programme only when
the car is standing still.
11
Werbung
