Grundig GSBS5100 Bedienungsanleitung Seite 18

Installation
2.
Connect the other end of the wa-
ter hose to the water pump by
pushing the hose into the pump's
hose inlet.
3.
Place and fasten the pump hose
inside the carboy.
4.
Once the connection is established,
plug in and start the water pump.
C
Please wait 2-3 minutes af-
ter starting the pump to ac-
hieve the desired efficiency.
C
See also the pump's user
guide for water connection.
C
When using carboy, water
filter is not required.
4.9 Water filter
(Optional)
The product may have internal or ex-
ternal filter, depending on the model.
To attach the water filter, follow the
16
instructions below.
4.9.1.Fixing external filter
on the wall (Optional)
A
WARNING:
filter on the product.
Check to see the following parts are
supplied with your product's model:
1.
Connector (1 piece): Used to at-
tach the water hose to the rear of
the product.
2.
Faucet adapter (1 piece): Used
for connection to the cold water
mains.
3.
Porous filter (1 piece)
4.
Hose clip (3 pieces): Used to fix
the water hose on the wall.
5.
Filter connecting apparatus (2 pi-
eces): Used to fix the filter on the
wall.
6.
Water filter (1 piece): Used to con-
nect the product to the water ma-
ins. Water filter is not necessary
when using carboy connection.
1.
Connect the faucet adaptor to the
water mains valve.
2.
Determine the location to fix the
external filter. Fix the filter's con-
necting apparatus (5) on the wall.
Refrigerator / User Guide
16 /44 EN
Do not fix the
5
4
6
1
2
3