Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
5.
Water filter (1 piece *Optional):
Used to connect the mains water
to the product. Water filter is not
required if carboy connection is
available.
4.6 Connecting water hose
to the product
To connect the water hose to the pro-
duct, follow the instructions below.
1.
Remove the connector on the hose
nozzle adaptor in the back of the
product and run the hose through
the connector.
2.
Push the water hose down tightly
and connect to the hose nozzle
adaptor.
3.
Tighten the connector manually to
fix on the hose nozzle adaptor. You
may also tighten the connector
using a pipe wrench or pliers.
14
4.
Connect the other end of the hose
to the water mains (See Section
4.7) or, to use carboy, to the water
pump (See Section 4.8).
4.7 Connecting to water mains
(Optional)
To use the product by connecting to
the cold water mains, a standard 1/2"
valve connector must be installed to
the cold water mains in your home.
If the connector is not available or if
you are unsure, consult a qualified
plumber.
1.
Detach the connector (1) from the
faucet adaptor (2).
3
3
Refrigerator / User Guide
14 /44 EN
1
2
2
1
Werbung
