Selve SEL Plus Originalbetriebsanleitung Seite 32

Troubleshooting
Problem
Motor does not work
Motor does not perform a short
movement at initial commissioning
UP and DOWN directions are
switched
Motor has stopped auto matically
when moving DOWN
Motor has stopped auto matically
when moving UP
All manuals and user guides at all-guides.com
Cause
Electric connection defective
Thermal protection switch has
triggered
Electric connection defective
End positions are already set
End positions set incorrectly
Blockage/obstacle recognition has
triggered
Overload recognition has triggered
Solution
Check the connection
Wait for 5 to 20 minutes
Check the connection
Reset motor to state at delivery
Reset end positions
Remove obstacle, check curtain run
Remove obstacle, check curtain
path, possibly select stronger motor